No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of PKI Configuration Tasks

Summary of PKI Configuration Tasks

Table 26-17 describes the PKI configuration tasks.

Table 26-17  PKI configuration tasks

Scenario

Description

Task

Apply for the local certificate online.

You can use SCEP to apply for the local certificate online.

Apply for the local certificate offline.

This is the only choice used when the device is unable to access the CA server due to some reasons such as network inaccessible.

You can generate the certificate application file on the device, and transfer the file to the CA to apply for a license in out of band mode (for example, web, disk, and email). Alternatively, you can directly send the certificate application information to the CA through web.

When you send the certificate application information to the CA through web, perform the following operations in order:
  1. Send certificate application information to the CA through web.
  2. Download the CA certificate, local certificate, and key pair, and upload them to the storage media.
  3. Install the key pair. For details, see Configuring an RSA Key Pair in Preconfiguring a Local Certificate.
  4. Install the CA certificate. For details, see (Optional) Installing a CA Certificate for a PKI Entity in Preconfiguring a Local Certificate.
  5. Install the local certificate. For details, see (Optional) Installing the Local Certificate.
  6. Verify the certificates. For details, see Verifying the CA and Local Certificates.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 130276

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next