No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Trackside APs

Configuring Trackside APs


The trackside APs on the vehicle-ground fast link handover network are Fit APs, and are uniformly controlled by the AC. This section describes the major steps for configuring the trackside APs. For details, see WDS and Mesh Configuration GuideVehicle-Ground Fast Link Handover Configuration Guide in the AC6605&AC6005&ACU2(AC&FITAP) V200R007C20 Product Documentation.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 130520

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next