No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reference Relationships Between WLAN Profiles

Reference Relationships Between WLAN Profiles

Various profiles are designed based on different functions and features of WLAN networks to help users configure and maintain functions of WLAN networks. These profiles are called WLAN profiles. Figure 1-1 shows the referencing relationships between WLAN profiles. By getting to know the referencing relationships, users can easily grasp the configuration roadmap of WLAN profiles and complete their configurations.

As shown in Figure 1-1, the following profiles can be bound to the AP: radio profile, VAP profile, Location profile, and Mesh profile. Some of the listed profiles can further reference other profiles, for example, the radio profile can reference an air scan profile and an RRM profile.

Click a profile name to check detailed information about the profile.

Figure 1-1  Reference relationships between WLAN profiles
Radio Profile Air Scan Profile RRM Profile VAP Profile SSID Profile Authentication Profile Authentication Profile Security Profile Traffic Profile User Profile STA Blacklist Profile STA Whitelist Profile Hotspot2.0 Profile Hotspot2.0 Profile Location Profile Mesh Profile Security Profile Mesh Handover Profile Mesh Whitelist Profile
NOTE:
  • The profiles marked with * can be configured as default profiles.

  • An AP radio can directly reference some profiles, including the radio profile, VAP profile, WDS profile.

WLAN profiles are designed to facilitate configuration and maintenance of WLAN functions. When configuring WLAN service functions, users need to configure parameters in matching WLAN profiles. After completing the configurations, they need to bind the profiles to upper-level profiles, AP, and the configured functions automatically take effect on the AP.

NOTE:
  • If a WLAN profile is bound to an upper-level profile, this upper-level profile should be bound to an AP.

For example, to configure air interface scan parameters, you can configure the parameters in an air scan profile and bind the air scan profile to a radio profile, which is then bound to an AP group or AP, as shown in Figure 1-1. The configurations of air interface scan parameters are automatically take effect. If referencing relationships between profiles are set in advance, parameter configurations in the air scan profile are automatically take effect.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116637

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next