No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples

Configuration Examples

Example for Backing Up the Configuration File

Networking Requirements

As shown in Figure 3-32, a user logs in to the device and backs up the configuration file to the TFTP server. So the configuration file can be recovered in case that the device is damaged.

Figure 3-32  Networking diagram of backing up the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Save the configuration file.

  2. Back up the configuration file through TFTP.

Procedure

  1. Save configurations to the config.cfg file.

    <Huawei> save config.cfg

  2. Back up the configuration file through TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      Run the tftp command in the user view to back up the specified configuration file.

      <Huawei> tftp 10.110.24.254 put flash:/config.cfg backup.cfg

Example for Recovering the Configuration File

Networking Requirements

As shown in Figure 3-33, a user logs in to the device and finds that some incorrect configurations cause errors in the system. To recover the original configuration, the user downloads the configuration file saved in the TFTP server to the device and specifies the configuration file for the next startup.

Figure 3-33  Network diagram of recovering the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Recover the configuration file that is backed up on the PC through TFTP.

  2. Specify the recovered configuration file for the next startup.

Procedure

  1. Recover the configuration file that is backed up on the PC through TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      Run the tftp command in the user view.

      <Huawei> tftp 10.110.24.254 get backup.cfg config.cfg

  2. Specify the recovered configuration file for the next startup.

    <Huawei> startup saved-configuration config.cfg

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116905

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next