No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

Feature Dependencies and Limitations

  • WPA2-802.1x authentication must be configured for Hotspot2.0 services.

  • In WPA2-802.1x authentication, an AP uses the same GTK to send broadcast packets to different STAs, which brings security risks. Therefore, the AP is forbidden to forward broadcast or multicast packets to STAs.

  • To automatically select and access Hotspot2.0 networks, wireless terminals must support Hotspot2.0 and 802.1x client, and be configured with identity credentials, such as the SIM/USIM card acquired from the service provider; otherwise, users need to manually search for SSIDs of the desired networks and enter identity authentication information to access the networks.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117622

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next