No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Link Aggregation

Maintaining Link Aggregation

This section describes how to maintain link aggregation.

Monitoring the Operating Status of an LAG


During daily maintenance, run the following commands in any view to check the operating status of LAGs.


  • Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check the Eth-Trunk configuration and status.
  • Run the display interface eth-trunk [ trunk-id ] command to check the status of an Eth-Trunk interface.
  • Run the display trunkmembership eth-trunk trunk-id command to displays information about member interfaces of an Eth-Trunk..
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116570

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next