No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Fault management efficiently manages and reports alarms or events generated on a device in a centralized manner.


The network expands and becomes more complex. When a module on a device is faulty, a great number of alarms may be generated on one or more devices. The alarms, however, may be lost when being sent to the NMS due to limited capability of handling alarms on the devices or the NMS. As a result, certain needed alarms cannot be displayed, which inconveniences network management.

To collect valid fault information on the NMS in an efficient way, configure the alarm severity and alarm reporting delay function to efficiently manage and report alarms and events in a centralized manner.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 119000

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next