No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking RU Running Statistics

Checking RU Running Statistics

Context

After RU online and management RU configurations are complete, run the following commands in any view to check RU running statistics.

Procedure

  • Run the display ap run-info { ap-name ap-name | ap-id ap-id } command to check RU running information.
  • Run the display ap performance statistics { ap-name ap-name | ap-id ap-id } command to check RU performance statistics.
  • Run the display radio { all | ap-group ap-group-name | ap-name ap-name | ap-id ap-id } command to check RU radio information.
  • Run the display ap asyn-message err-info { all | ap-name ap-name | ap-id ap-id } command to check records about RU restart failures.
  • Run the display ap uncontrol all command to check unauthorized APs.
  • Run the display channel switch-record { all | ap-name ap-name radio radio-id | ap-id ap-id radio radio-id | reason reason } command to check channel switching records.
  • Run the display ap traffic statistics wireless { ap-name ap-name | ap-id ap-id } radio radio-id [ ssid ssid ] command to check packet statistics on an RU radio.
  • Run the display ap elabel { ap-name ap-name | ap-id ap-id } command to check RU electronic label information.
  • Run the display ap service-config acl { ap-name ap-name | ap-id ap-id } command to check ACL configurations on an RU.
  • Run the display ap port { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac } command to check the RU port status and traffic information.
  • Run the display distribute-ap { all | ap-id ap-id | ap-mac ap-mac | ap-name ap-name | central-ap-id central-ap-id | central-ap-mac central-ap-mac | central-ap-name central-ap-name } command to check RU information.
  • Run the display ap statistics command to check statistics on the types of RUs added to a central AP.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118058

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next