No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applicable Scenario

Applicable Scenario

As shown in Figure 27-38, the enterprise network connects to the WAN through the central AP as the egress gateway. To ensure network quality and standardize employee behaviors, use service detection technology to identify various applications on networks and control packets of the application protocols. For example:

  • Permit network browsing behaviors so that office services of users can be correctly transmitted on the internal network.
  • Block applications of IM type such as QQ_IM or limit the rate of traffic matching these applications to standardize employee behaviors.
  • Limit bandwidth of P2P packets such as BT and eDonkey_eMule packets to ensure network quality.
Figure 27-38  Service detection networking
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114869

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next