No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the IPSG Function

Configuring the IPSG Function

Context

To defend against IP address spoofing attacks, enable the IP source guard (IPSG) function to check IP packets against a binding table. This function prevents unauthorized packets from passing through an RU and ensures network security.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    vap-profile name profile-name

    The VAP profile view is displayed.

  4. Run:

    ip source check user-bind enable

    The IPSG function is enabled on the RU.

    By default, IP source guard is disabled on RUs.

    NOTE:
    After the IPSG function is enabled, run the undo learn-client-address disable command to enable STA address learning to make the IPSG function take effect.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117246

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next