No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restrictions and Precautions

Restrictions and Precautions

This section describes the restrictions and precautions for you to know when configuring intrusion prevention.

Learn about the following items before the configuration:

  • If a signature has been removed from the latest IPS signature database after an update, all configurations associated with this signature cease to take effect.

  • In a per-flow load balancing deployment, intrusion prevention is supported but with a lower detection rate than in active/standby mode.

  • Intrusion prevention may function improperly if the forward and return paths of packets are different.

  • If the Central AP is deployed between two routers, and the routers detect each other through BFD, you are advised to properly prolong the BFD time (longer than 100 ms is recommended) to prevent BFD flapping resulting from occasional network congestion.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114915

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next