No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring STAs to Go Online

Configuring STAs to Go Online

Pre-configuration Tasks

Before configuring STAs to go online, complete the following tasks:
  • Perform the task of Configuring AP System Parameters.

  • Configure a DHCP server to allocate IP addresses to STAs.

    NOTE:

    For details on how to configure a DHCP server, see DHCP Configuration. To use a DHCP server to assign IP addresses to STAs, configure the fat AP as the DHCP server or use an independent DHCP server.

    • When an enterprise branch has no independent DHCP server, configure an fat AP as the DHCP server.
    • An independent DHCP server applies to large WLANs of large- and medium-sized campus networks.

Procedure

Configuring a Radio and Configuring a VAP can be performed in any sequence. Verifying the STA Online Result is performed after all configuration tasks are complete.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114423

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next