No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Cloud APs

Default Settings for Cloud APs

Table 4-3  Default settings for cloud APs



Default working mode of an AP

An AP works as a Fit AP by default.


The AP5030DN-C works as a cloud AP by default.

User name/Password admin/
IP address/Subnet mask for wired connection
SSID of the offline management VAP


xxxx indicates the last four bits of the AP's MAC address.


If the cloud AP is offline or has not gone online, connect a PC to the cloud AP through the offline management VAP and operate the cloud AP. After the PC dynamically obtains an IP address (169.254.2.x/24, and is the gateway address for the offline management VAP) and connects to the cloud AP, you can log in to the cloud AP through STelnet to perform operations.

Password of the offline management VAP hw_manage
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114475

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next