No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NAC

Maintaining NAC

Clearing NAC Statistics

Context

Cleared statistics cannot be restored. Exercise caution when you run the following commands.

Procedure

  • Run the reset dot1x statistics command in the user view to clear statistics about 802.1X authentication.
  • Run the reset mac-authen statistics command in the user view to clear statistics about MAC address authentication.

Monitoring NAC Operation

Context

In routine maintenance, you can run the following commands in any view to check whether NAC is functioning properly.

Procedure

  • Run the display access-user command to view information about NAC access users.
  • Run the display dot1x command to view information about 802.1X authentication.
  • Run the display mac-authen command to view information about MAC address authentication.
  • Run the display portal command to view information about Portal authentication.
  • Run the display portal local-server connect command to view the connection status of users to be authenticated on a built-in Portal server.
  • Run the display server-detect state command to view the status of a Portal server.
  • Run the display portal quiet-user { all | user-ip ip-address | server-ip ip-address } command to view information about Portal authentication users who are quieted.
  • Run the display mac-authen quiet-user { all | mac-address mac-address } command to view information about MAC address authentication users who are quieted.
  • Run the display portal local-server wechat-authen user { all | user-ip ip-address } command to check the quiet states of WeChat users who have not been successfully authenticated on the built-in Portal server.
  • Run the display webmng configuration command to view the configuration of the WEBMNG module.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 115491

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next