No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Vehicle-Ground Fast Link Handover

Monitoring Vehicle-Ground Fast Link Handover


  • Run the display mesh vap { all | mesh-id mesh-id } command to check information about Mesh VAPs of a specified Mesh ID or all Mesh IDs.
  • Run the display wlan mesh link { all | mesh-profile profile-name } command to check information about Mesh links.
  • Run the display mesh-neighbor-rssi [ interface radio-interface ] [ max-neighbor-number max-number ] command to check RSSI information collected by an AP.
  • Run the display mesh-handover-trace command to check roaming traces of a vehicle-mounted AP.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117562

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next