No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN Basic Service Configuration Procedure

WLAN Basic Service Configuration Procedure

You can follow the procedure in Figure 1-2 to configure WLAN basic services.

The WLAN basic service configuration procedure includes the following steps:
  1. Configure network interconnection.
  2. Configure system parameters for the AP.
  3. Configure WLAN services.
Figure 1-2  WLAN basic service configuration flowchart
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 119180

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next