No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring System Startup Files

Configuring System Startup Files

Pre-configuration Tasks

Configure the device to use the specified configuration file or patch software for the next startup.

Before configuring the system startup files, complete the following tasks:
  • Start the device and logging in to the device locally or remotely.
  • Save the startup files in the root directory of the device.

Context

Before specifying the files for next startup, you can run the display startup command to view the specified files for next startup.
  • If no configuration file is specified for next startup, the device will start with the default configuration file (vrpcfg.zip for example). If no configuration file is stored in the default directory, the device uses the default parameters for initialization. The configuration file name extension must be .cfg or .zip. In addition, the configuration file must be saved to the root directory of the storage device.
  • A patch file uses .pat as the file name extension. The specified patch file to be loaded for next startup must also be saved to the root directory of the storage device.

Procedure

  • Run:

    startup system-software { backup | current }

    The system software to be loaded for next startup is specified.

  • Run:

    startup saved-configuration configuration-file

    The configuration file for next startup is specified.

    The device reads the configuration file from the root directory of the storage device for initialization when powered on.

  • (Optional) Run:

    startup patch patch-name

    The patch file for next startup is specified.

Checking the Configuration

After the configuration is complete, run the display startup command to view the configuration file and patch file for next startup.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 115848

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next