No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Configuration Errors

Common Configuration Errors

This section provides common configuration errors and troubleshooting methods.

The Device as a PPPoE Client Connects to Users in a Downstream LAN, the Users Cannot Access the Internet After NAT Is Configured

Fault Description

The device functions as a PPPoE client and connects to users in a downstream LAN. NAT is configured on the device to translate the users' private IP addresses into public IP addresses. After Easy IP is configured, the users cannot access the Internet.

Fault Analysis

NAT is configured on the interface to which the dialer interface is bound, but not configured on the dialer interface.


Run the nat outbound acl-number command in the dialer interface view to configure Easy IP.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114217

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next