No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes the functions of global IAE configurations.

Global IAE configurations are used to specify the mode for the IAE to process traffic or files. The configuration results affect the detection results of the content security function.

For example, after the maximum file decompression depth is changed, malicious files with multiple compression layers may be permitted by the Central AP because the number of compression layers exceeds the specified value. To increase the maximum file decompression depth, the load of the Central AP will be increased, affecting the device performance. Therefore, the suitable global IAE configurations improve the detection efficiency and reduces the residual error rate. Generally, the default values of global parameters are recommended.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116857

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next