No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Log Backup and Log Suppression Functions on an AP

Configuring the Log Backup and Log Suppression Functions on an AP


If a STA keeps attempting to connect to an AP because of signal interference or instability, the AP processes a large number of duplicate login and logout logs in a short period, causing a huge waste of resources.

To address this problem, enable log suppression.


  1. Run:


    The system view is displayed.

  2. Run:

    access-user syslog-restrain period period

    The period of system log suppression is configured.

    By default, the period of system log suppression is 300s.

  3. Run:

    access-user syslog-restrain enable

    The system log suppression function is enabled.

    By default, system log suppression is enabled.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114782

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next