No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WIDS Spoof SSID Profile

WIDS Spoof SSID Profile

WLAN services are available in public places, such as banks and airports. Users can connect to the WLANs after associating with corresponding SSIDs. If a rogue AP is deployed and provides spoofing SSIDs similar to authorized SSIDs, the users may be misled and connect to the rogue AP, which brings security risks. To address this problem, configure a fuzzy matching rule to identify spoofing SSIDs. The device compares a detected SSID with the matching rule. If the SSID matches the rule, the SSID is considered a spoofing SSID. The AP using the spoofing SSID is a rogue AP. After rogue AP containment is configured, the device contains the rogue AP and disconnects users from the spoofing SSID.

For the detailed configuration, see (Optional) Configuring Fuzzy Matching Rules for Identifying Spoofing SSIDs.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 129542

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next