No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overviews of Traffic Policing

Overviews of Traffic Policing

Traffic policing monitor traffic entering a network to control traffic and resource usage and better serve users.

If the transmit rate of packets is greater than the receive rate of packets or the rate of an interface on a downstream device is smaller than that of the connected interface on the upstream device, network congestion occurs. If traffic sent by users is not limited, continuous burst data from numerous users may aggravate network congestion. To efficiently use limited network resources and better serve more users, traffic sent by users must be limited.

Traffic policing limit the traffic within a proper range and to protect network resources and user benefits.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117697

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next