No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Longitude and Latitude of an RU

Setting the Longitude and Latitude of an RU

Context

The longitude and latitude of an RU enable you to quickly view the RU location.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    ap-id ap-id
    Or
    ap-mac ap-mac
    Or
    ap-name ap-name

    The AP view is displayed.

  4. Run:

    coordinate longitude { e | w } longitude-value latitude { s | n } latitude-value

    The longitude and latitude of the RU are set.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117630

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next