No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining IP Performance

Maintaining IP Performance

This section describes how to clear IP performance statistics to maintain IP performance.

Clearing IP Performance Statistics


The IP/TCP/UDP traffic statistics cannot be restored after being cleared. Therefore, confirm your operation before clearing the IP performance statistics.


  • Run the reset ip statistics [ interface interface-type interface-number ] command in the user view to clear IP statistics.
  • Run the reset ip socket monitor [ task-id task-id socket-id socket-id ] command in the user view to clear information in a socket monitor.
  • Run the reset rawip statistics command in the user view to clear statistics about RawIP packets.
  • Run the reset tcp statistics command in the user view to clear TCP statistics.
  • Run the reset udp statistics command in the user view to clear UDP statistics.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116593

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next