No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of WLAN Configuration Tasks

Summary of WLAN Configuration Tasks

After STA online parameters are configured, and all WLAN configurations are complete, STAs can access the WLAN.

The basic WLAN service functions can be implemented only when all the following configuration tasks are completed.

In the following tasks, step 1 and step 2 are mandatory, and step 3 is optional. You need to complete basic WLAN service configurations in the listed order.
  1. Configuring AP System Parameters: Configure AP system parameters to ensure that radio parameters (channel and power) of an AP comply with local laws and regulations.
  2. Configuring STAs to Go Online: Configure STAs to go online and configure service VAPs for APs to provide differentiated WLAN services for users.
  3. AP Management Configuration Guide (Common AP): Perform AP management configurations.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118883

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next