No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction

Introduction

To configure an AP that is first powered on, log in to it in wired mode (through the console port or STelnet) or wireless mode (by associating with the default SSID). Upon the first login, confirm or configure the country code.

The console port is a serial port on an AP.

To configure an AP, connect the user terminal serial port to the AP's console port.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116238

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next