No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining SAC

Maintaining SAC

Checking SAC Statistics


  • Run the display sac protocol-statistic { period | total } { inbound | outbound | all } { protocol protocol-name | top-n number } { } command to check statistics on packets of different SAC application protocols.

Clearing SAC Statistics


Statistics cannot be restored after being cleared. Therefore, confirm the action before you use the command.


  • Run the reset sac protocol-statistic { inbound | outbound | all } { ap-id ap-id radio-id radio-id ssid ssid | ap-name ap-name radio-id radio-id ssid ssid | user user-mac } command in the user view to clear statistics on packets of SAC application protocols.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 115621

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next