No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Passenger Flow Analysis Function

Configuring the Passenger Flow Analysis Function

Context

With the help of the WLAN location function, the WLAN passenger flow analysis function obtains MAC addresses of Wi-Fi terminals used by passengers and the stay duration of passengers in a place, such as a shopping mall or supermarket, and sends the obtained information to eSight, helping to collect and analyze passenger flow statistics.

Pre-configuration Tasks

Before configuring the passenger flow analysis function, perform the task of WLAN Service Configuration Guide (Common AP).

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  3. Run:

    work-mode { normal | monitor }

    The working mode of the radio is configured.

    By default, the AP radio works in normal mode and only transmits data of wireless users.

    NOTE:
    An AP can work in two modes:
    • normal: indicates the normal mode.
      • If the air scan function is disabled on a radio, the radio is used to transmit common WLAN services.
      • If the air scan function is enabled on a radio, the radio transmits common WLAN services and also implements detection. Transmission of common WLAN services may be affected.
    • monitor: indicates the monitor mode. In this mode, the AP provides detection functions but does not support common WLAN services. The AP supports only detection-related WLAN services, including WIDS and terminal location.

  4. Run:

    quit

    Return to the System view.

  5. Run:

    wlan

    The WLAN view is displayed.

  6. Run:

    air-scan-profile name profile-name

    An air scan profile is created and the air scan profile view is displayed.

    By default, the system provides the air scan profile default.

  7. Run:

    scan-channel-set { country-channel | dca-channel | work-channel }

    An air scan channel set is configured.

    By default, an air scan channel set contains all channels supported by the country code of an AP.

  8. (Optional) Run:

    scan-period scan-time

    The period during which the AP scans channels is configured.

    The default period during which an AP scans channels is 60 ms.

    NOTE:

    A shorter channel scan period means fewer location packets that the device can obtain, which affects the location accuracy. A longer channel scan period has a much larger impact on services.

  9. (Optional) Run:

    scan-interval scan-time

    The interval at which the AP scans channels is configured.

    By default, the air scan interval is 60000 ms.

    The channel scan interval applies to background neighbor probing, terminal location, and WIDS applications.

    NOTE:

    If the customer has high requirements on real-time data analysis, configure a small air scan interval using the scan-interval command to improve the scan frequency; however, higher scan frequency indicates much larger impact on the services.

  10. Run:

    quit

    Return to the WLAN view.

  11. Run:

    radio-2g-profile name default or radio-5g-profile name default

    The radio profile view of the specified AP is displayed.

    The Fat AP supports only the 2G radio profile default and 5G radio profile default.

  12. Run:

    air-scan-profile profile-name

    The air scan profile is bound to the radio profile.

    By default, the air scan profile default is bound to a radio profile.

  13. Run:

    quit

    Return to the WLAN view.

  14. Run:

    location-profile name profile-name

    A location profile is created and the location profile view is displayed.

    By default, no location profile is created.A Fat AP supports only one location profile.

  15. Run:

    private mu-enable

    Terminal location is enabled on the AP.

    By default, terminal location is disabled on an AP.

  16. (Optional) Run:

    private report-frequency time

    The interval at which the AP reports channel scan information is configured.

    By default, an AP reports channel scan information every 20s (20000 ms).

  17. Run:

    private server ip-address ip-address port port-num

    The destination IP address and port number are configured for the AP to report channel scan information.

    By default, no destination IP address or port number is configured for the AP to report terminal location data.

  18. Run:

    quit

    Return to the WLAN view.

  19. Run:

    quit

    Return to the System view.

  20. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  21. Run:

    location-profile profile-name

    The location profile is bound to the specified radio interface.

    By default, no location profile is bound to an AP's radio interface.

Checking the Configuration

  • Run the display location-profile name profile-name command to check terminal location configurations.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114270

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next