No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintenance LLDP

Maintenance LLDP

This section describes how to clear LLDP statistics and monitor LLDP status.

Clearing LLDP Statistics

Context

Statistics cannot be restored after being cleared. Therefore, exercise caution when you run the following commands.

Procedure

  • Run the reset lldp statistics [ interface interface-type interface-number ] command in the user view to clear LLDP packet statistics in the system or on an interface.
  • Run the lldp clear neighbor [ interface interface-type interface-number ] command in the user view to clear neighbor information in the system or on an interface.

Monitoring LLDP Status

Context

In routine maintenance, you can run the following commands in any view to check the LLDP status.

Procedure

  • Run the display lldp statistics [ interface interface-type interface-number ] command to view statistics about sent and received LLDP packets in the system or on an interface.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117368

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next