No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Public Network Access of STAs Through NAT Supported by APs with No Configuration

Public Network Access of STAs Through NAT Supported by APs with No Configuration

After being powered on, an AP with no configuration can provide WLAN service coverage, which improves the AP's usability and simplifies WLAN service configuration and operations. The SSID HUAWEI-XXXX has been created on the AP before it is delivered. After associating with the WLAN with the SSID HUAWEI-XXXX using the default configurations, STAs can access the Internet.

As shown in Figure 9-15, the AP functions as the NAT gateway for STAs and allows STAs to access the public network through NAT.

Figure 9-15  STAs' access to the public network through NAT
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 115725

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next