No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section describes the default configuration of common Ethernet interface parameters.

Table 6-7  Default configuration of Ethernet interfaces

Parameter

Default Value

Working mode of combo interfaces

Auto, in which a combo interface can automatically switch between the optical and electrical interface modes.

Media Dependent Interface (MDI) mode

Auto, in which an interface can automatically identify the type of the connected network cable.

NOTE:
MDI mode of the interface can only be Auto, and is not configurable.

Auto-negotiation

Auto-negotiation

Duplex Mode

Auto-negotiation mode: negotiated by the local and remote interfaces.

Non-auto-negotiation mode: full-duplex mode

Rate

Auto-negotiation mode: negotiated by the local and remote interfaces.

Non-auto-negotiation mode: maximum rate supported by an interface

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117493

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next