No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Principles

Principles

This section describes the implementation of traffic suppression.

Traffic Suppression

Traffic suppression prevents broadcast storms caused by broadcast packets, multicast packets, and unknown unicast packets in the following modes:

  • The device performs traffic suppression for these packets per second on the inbound interface.

    The device detects rates of these packets and compares the rates with the thresholds. When the inbound traffic reaches the threshold, the system discards excess traffic.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117240

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next