No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NTP

Maintaining NTP

In the maintenance of NTP, the running status of NTP is monitored.

Monitoring the Running Status of NTP


To monitor the NTP running status after configurations of NTP are complete, run the following commands in any view.


  • Run:

    display ntp-service status

    Check the status information of NTP.

  • Run:

    display ntp-service sessions [ verbose ]

    All session information maintained by the local NTP service is checked.

  • Run:

    display ntp-service trace

    The path from the local device to the reference clock source is checked.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117248

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next