No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

License Support

A license specifies the capacity of device management services provided by the Agile Controller-Campus. A license controls validity periods, types, and quantity of managed devices.
  • Validity period control: Validity periods of trial and official licenses can be controlled. The trial period of a license is 30 days since the tenant account registration.
  • Device type control: Currently, switches, firewalls, and APs are supported.
  • Device quantity control: Control the number of managed devices. If the number of managed devices reaches the upper limit allowed in a license, new devices cannot be bound to the license.

Tenants need to purchase licenses from managed service providers (MSPs). Device service configuration and management on the Agile Controller-Campus can be implemented only after a device associates with a license.

Version Support

Table 4-1  Products and minimum version supporting

Minimum Version



AP2050DN, AP2050DN-E, AP4050DN-E, AP4050DN-HD, AP5030DN-C, AP6050DN, AP6150DN, AP7050DN-E, AP7050DE, AP8030DN, AP8130DN, AD9430DN-12, and AD9430DN-24


AP4051DN, AP4151DN, AP4050DN, AP4050DN-S, AP8150DN, AP8050DN, and AP8050DN-S




AP4051TN, AP6052DN, AP7052DN, AP7152DN, AP7052DE, AP8050TN-HD, AP8082DN, and AP8182DN

Feature Dependencies and Limitations

In the cloud-based management mode, the user name and password configured through web or serial ports are effective only before the switch registers with the cloud management platform. After the switch registers, the cloud management platform will deliver the user name and password to the switch, which will override the ones configured in other ways. The user name and password delivered from the cloud management platform are required for login to a cloud-managed switch as long as the switch has registered with the cloud management platform.

After switching an AP to a cloud AP, you are advised to use the following commands in traditional mode listed in Table 4-2.

Table 4-2  Commands supported by cloud APs


Function Description

interface GigabitEthernet

Displays the GE interface view.

interface XGigabitEthernet

Displays the XGE interface view.


Displays the diagnostic view.


Displays the system view.

acl 2000-2999

undo acl 2000-2999

Creates or deletes an ACL.

acl 3000-3998

undo acl 3000-3998

acl 4000-4997

undo acl 4000-4997


undo rule

Creates or deletes an ACL rule.


Configures the packet header obtaining function.


Displays the device status or configurations.


Returns to the upper-level view.


Returns to the user view.


Checks whether a specified IPv4 address is reachable.


Displays the path of data packets from the source to the destination, and detects network connectivity.


Displays the FTP client view.

All commands in the FTP client view

Configures FTP transmission.


Performs patch installation configuration.

startup system-software

Specifies the system software for the next startup.

startup patch

Specifies a patch file for the next startup.

reboot fast

Restarts an AP.


Deletes a file

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117494

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next