No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Sampling Parameter on an RU

Configuring Sampling Parameter on an RU

Context

Within each sampling interval, an RU collects desired statistics based on RUs, radios, and STAs (when the RU collects data based on STAs, it collects only data displayed by the display command). Within each statistics collection interval, the RU computes the average of sampled values and reports results to the central AP. You can view all statistics collected by the RU on the central AP.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    ap-system-profile name profile-name

    An AP system profile is created, and the AP system profile view is displayed.

    By default, the system provides the AP system profile default.

  4. Run:

    sample-time sample-time

    The sampling interval is configured for an RU.

    The default sampling interval of an RU is 30s.

  5. Run:

    quit

    Return to the WLAN view.

  6. Bind an AP system profile to an AP group or AP.

    • Binding an AP system profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

    • Binding an AP system profile to an AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118752

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next