No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying a Hotspot2.0 Profile to a VAP Profile

Applying a Hotspot2.0 Profile to a VAP Profile

Context

After the Hotspot2.0 profile configuration is complete, apply the Hotspot2.0 profile to a VAP profile. Each VAP profile contains one Hotspot2.0 profile. Hotspot2.0-capable wireless terminals that have obtained identity credentials from the service providers can obtain network information from the connected APs, and automatically select and access the desired networks.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    vap-profile name profile-name

    The VAP profile view is displayed.

  4. Run:

    hotspot2-profile profile-name

    The Hotspot2.0 profile is applied to the VAP profile.

    By default, no Hotspot2.0 profile is bound to a VAP profile.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114999

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next