No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logical Interfaces

Logical Interfaces

Logical interfaces do not exist physically. They are manually configured for data exchange.

This topic describes logical interfaces supported by devices.

Table 6-9  Logical interface types
Interface Type Description Configuration Reference
Eth-Trunk interface An Eth-Trunk interface has Layer 2 and Layer 3 features and is formed by binding multiple Ethernet interfaces to provide more bandwidth and higher transmission reliability. For details about how to configure an Eth-Trunk interface, see Link Aggregation Configuration.
VLANIF interface A VLANIF interface has Layer 3 features and enables VLANs to communicate after being assigned an IP address. For details about how to configure a VLANIF interface, see VLAN Configuration.
Loopback interface A loopback interface is always Up and can be configured with a 32-bit subnet mask. -
Null interface A null interface is used to filter routes because any data packets received by the null interface are discarded. -
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117468

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next