No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Air Scan Profile

Air Scan Profile

The air scan profile is used for radio calibration and Wireless Intrusion Detection System (WIDS) data analysis. An AP periodically scans surrounding radio signals and reports the collected information to an AC or server.

  • Radio calibration

    An authorized AP scans surrounding radio signals, collects information about surrounding authorized APs, rogue APs, and non-Wi-Fi devices.

    For the detailed configuration, see Configuring Radio Calibration.

  • WIDS data analysis

    A monitor AP scans channels to monitor information about neighboring wireless devices, collects information about neighboring wireless devices by listens on WLAN packets sent from neighboring wireless devices, and periodically reports collected information to an AC. The AC then uses the information to determine rogue devices.

    For the detailed configuration, see Configuring Rogue Device Detection.

The air scan profile takes effect only after it is referenced by the radio profile.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116947

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next