No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Mesh Radio Parameters

Configuring Mesh Radio Parameters


  1. Run:


    The system view is displayed.

  2. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  3. Run:

    channel { 20mhz | 40mhz-minus | 40mhz-plus | 80mhz | 160mhz } channel or channel 80+80mhz channel1 channel2.

    The working bandwidth and channel are configured for a radio.

    By default, the working bandwidth of a radio is 20 MHz, and no working channel is configured for a radio.

    The vehicle-mounted and trackside APs must be configured with the same channel and bandwidth.


    The 80 MHz, 160 MHz, and 80+80 MHz working bandwidths are only supported in the 5G radio view.

    Currently, only the 5 GHz radio of the AP6050DN, AP7050DE, AP7050DN-E and AP6150DN supports 160 MHz, and 80+80 MHz. Only the 5 GHz radio of the AP4030TN, AP4050DN-E, AP4050DN-HD, AP6050DN, AP6150DN, AP7050DN-E, AP7050DE, AP2050DN, AP2050DN-E, AP4050DN, AP4050DN-S, AP4051DN, AP4151DN, AP8050DN, AP8050DN-S, AP8150DN, AP1050DN-S, AP5030DN, AP5130DN, AP8030DN, AP8130DN, AP4030DN, AP4130DN, AP9131DN, and AP9132DN supports 80 MHz.

    Different countries support different wireless channels. You can run the display ap configurable channel command to check the configurable channels supported by APs.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118430

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next