No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section describes the default STP/RSTP configuration. You can change the configuration based on actual needs.


Default Setting

Working mode


STP/RSTP status

STP/RSTP is disabled globally and enabled on an interface.

Switching device priority


Port priority


Algorithm used to calculate the default path cost

dot1t, IEEE 802.1t

Forward Delay Time

1500 centiseconds

Hello Time

200 centiseconds

Max Age Time

2000 centiseconds

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118613

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next