No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Device

Restarting the Device

Pre-configuration Tasks

Before restarting the device, configure system startup files.

Context

Use either of the following methods to restart the device:
  • Restart the device immediately after configuration: The device restarts immediately after the reboot command is run.
  • Restart the device at scheduled time: The device can be restarted at a specified time later. When the configuration is complete, you can configure the device to restart at time when few services are running to minimize the impact of device restart on services.

The device records information about every restart, including the number of device restart, details, and causes. Run the display reset-reason command to view the device restart information.

  • Do not restart the device unless necessary because device restart causes service interruption in a short time.

  • Save the current configuration so that it will take effect after the device restarts.

Procedure

  • Restart the device immediately.

    In the user view, run the reboot [ fast ] command to restart the device.

    • The fast parameter indicates quick restart of the device. The system does not ask you whether to save the configuration file in fast startup.

  • Restart the device at scheduled time.

    In the user view, run the schedule reboot { at time | delay interval } command to restart the device at scheduled time.

    • at time specifies the specific time to restart the device.
    • delay interval specifies the waiting time before restarting the device.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116439

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next