No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

This section describes the configuration task and logic of STP/RSTP.

Table 7-29 lists the configuration task summary of STP/RSTP.

Table 7-29  Configuration task summary of STP/RSTP
Item Description Task

Configuring Basic STP/RSTP Functions

You can configure STP/RSTP on switches on an Ethernet to trim a network into a tree topology free from loops.

Configuring Basic STP/RSTP Functions

Setting STP Parameters That Affect STP Convergence

STP cannot implement rapid convergence. However, you can set STP parameters including the network diameter, timeout interval, Hello timer value, Max Age timer value, and Forward Delay timer value.To speed up convergence, set parameters that affect STP convergence.

Setting STP Parameters That Affect STP Convergence

Setting RSTP Parameters That Affect RSTP Convergence

RSTP implements rapid convergence by configuring the link type of a port and fast transition mechanism.

Setting RSTP Parameters That Affect RSTP Convergence

Configuring RSTP Protection Functions

This section describes how to configure RSTP protection functions. You can configure one or more functions.

Configuring RSTP Protection Functions

Setting Parameters for Interworking Between the CE series switches and a Non-Huawei Device

To implement interworking between the CE series switches and a non-Huawei device, select the fast transition mode based on the Proposal/Agreement mechanism of the non-Huawei device.

Setting Parameters for Interworking Between the Access Point and a Non-Huawei Device

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 114481

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next