No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multicast CAC Configuration

Multicast CAC Configuration

Configuring Multicast CAC Based on the Multicast Bandwidth

Pre-configuration Tasks

Before configuring multicast CAC, complete the Multicast configuration. For details, see Configuring Multicast-to-Unicast Conversion.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    igmp-snooping max-bandwidth max-bandwidth

    The maximum multicast bandwidth is configured globally.

    By default, the maximum multicast bandwidth is not globally configured.

  3. Run:

    igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address bandwidth bandwidth-value

    The bandwidth of global multicast groups is configured.

    By default, the bandwidth of global multicast groups is not configured.

Checking the Configuration
  • Run the display igmp-snooping global-cac command to check the global multicast CAC configuration and statistics.

Configuring Multicast CAC Based on the Number of Multicast Group Memberships

Pre-configuration Tasks

Before configuring multicast CAC, complete the multicast configuration. For details, see Configuring Multicast-to-Unicast Conversion.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    igmp-snooping max-user max-user

    The maximum number of global multicast group memberships is configured.

    By default, the maximum number of multicast group memberships is not configured.

Checking the Configuration
  • Run the display igmp-snooping global-cac command to check the global multicast CAC configuration and statistics.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117252

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next