No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Attack Defense

Maintaining Attack Defense

This section describes how to maintain attack defense, including clearing attack defense statistics.

Clearing Attack Defense Statistics


Statistics cannot be restored after being cleared. Exercise caution when you run the reset command.

To clear attack defense statistics, run the following command.


  • Run the reset anti-attack statistics [ abnormal | fragment | tcp-syn | udp-flood | icmp-flood ] command to clear attack defense statistics.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118338

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next