No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File System Overview

File System Overview

File System

The file system manages storage devices and all files including configuration files and system software stored on them. In the file system, users can create, delete, modify, and rename a file or a directory, and view contents of a file.

Storage Device

The device only supports the flash card.

Naming Rules for Files

A file name is a string of 1 to 64 case-sensitive characters. The file name formats are as follows:

  • File name

    If the name of a file is in this format, the file is in the current working directory.

  • Drive + Path + File name

    This file name format uniquely identifies a file in a specified path.

    In the format, drive indicates the storage device and can be set to flash:.

    In the file name, path indicates the directory and subdirectory. The directory name is case-sensitive. The space character and the following characters and cannot be used in the directory name: ~ * / \ : ' "

    The path can be an absolute path or relative path.
    • flash:/my/test/ is an absolute path.

    • selftest/ is related to the current working directory and indicates the selftest directory in the current working directory.

    For example, in the dir flash:/my/test/mytest.txt command, flash:/my/test/ is an absolute path.

    To find the mytest.txt file from a directory related to the current working directory (flash:/my/ for example), run the dir test/mytest.txt command.

    • In the file operation command format, filename indicates the file name.

    • In the file operation command format, directory indicates the path (drive + path).

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 129840

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next