No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

Feature Dependencies and Limitations

  • If an AP radio is configured to work in monitor mode and also has WDS or Mesh services deployed, the working mode that takes effect on the AP radio is normal.

  • If WIDS, background neighbor probing, or terminal location is configured on an AP radio, the radio cannot be used to set up a WDS bridge or Mesh link.

  • When an AP working in normal mode periodically scans channels, services may be interrupted for a short time. The AP can perform containment on all channels.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116521

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next