No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  • Station (STA): a terminal that supports 802.11 standards. For example, a PC that has a wireless network interface card (NIC) or a mobile phone that supports WLAN.

  • Access point (AP): a device that provides 802.11-compliant wireless access for STAs. APs connect wired networks to wireless networks.

    • Fat AP: an AP that provides wireless access for STAs in the autonomous architecture. A Fat AP provides wireless connection, security, and management functions.
  • Radio signal: a high-frequency electromagnetic wave that has long-distance transmission capabilities. Radio signals provide transmission media for 802.11-compliant WLANs. Radio signals described in this document are electromagnetic waves in the 2.4 GHz or 5 GHz frequency band.

  • Virtual access point (VAP): a WLAN service entity on an AP. You can create different VAPs on an AP to provide wireless access service for different user groups.
  • Service set identifier (SSID): a unique identifier that identifies a wireless network. When you search for available wireless networks on your laptop, SSIDs are displayed to identify the available wireless networks.

    SSIDs are classified into two types:
    • Basic service set identifier (BSSID): the link-layer MAC address of a VAP on an AP. Figure 9-1 shows the relationship between VAP and BSSID.
      Figure 9-1  Relationship between VAP and BSSID
    • Extended service set identifier (ESSID): a chosen identifier for one or a group of wireless networks. For example, in Figure 9-1, SSID guest identifies one wireless network, and SSID internal identifies another wireless network. A STA scans all wireless networks and selects a wireless network based on the SSID. In general terms, an SSID refers to an ESSID.
  • Basic service set (BSS): an area covered by an AP. STAs in a BSS can communicate with each other.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118968

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next