No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

Table 5-6  Default parameter settings of the information center

Parameter

Default Setting

Information center

Enabled

Maximum number of logs in the log buffer

512

Maximum number of traps in the trap buffer

256

Log file size

1 MB

Maximum number of log files that can be saved

200

Log host IP address

None

Timestamp format

date

Default Output Rules of Information Channels

Default output rules define information modules to which different types of information can be output, lowest information severity, and information channels. See Table 5-7.

Table 5-7  Default output rules
Output Channel Module Enabled to Output Information Log Trap Debugging Message
Status Lowest Output Severity Status Lowest Output Severity Status Lowest Output Severity
0 (console) default (all modules) Enabled warning Enabled debugging Enabled debugging
1 (remote terminal) default (all modules) Enabled warning Enabled debugging Enabled debugging
2 (log host) default (all modules) Enabled informational Enabled debugging Disabled debugging
3 (trap buffer) default (all modules) Disabled informational Enabled debugging Disabled debugging
4 (log buffer) default (all modules) Enabled warning Disabled debugging Disabled debugging
5 (SNMP agent) default (all modules) Disabled debugging Enabled debugging Disabled debugging
6 (channel 6) default (all modules) Enabled debugging Enabled debugging Disabled debugging
7 (channel 7) default (all modules) Enabled debugging Enabled debugging Disabled debugging
8 (channel 8) default (all modules) Enabled debugging Enabled debugging Disabled debugging
9 (channel 9) default (all modules) Enabled debugging Enabled debugging Disabled debugging
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 115485

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next