No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AP Indicators

Configuring AP Indicators


Different states of AP indicators reflect different meanings, thereby facilitating installation and management. However, blinking indicators of indoor APs deployed in hospitals and hotels may affect people's nighttime rest. Therefore, you can turn off AP indicators after APs are installed and run properly.


  1. Run:


    The system view is displayed.

  2. Run:

    led off [ time-range time-range-name ]

    AP indicators are configured to turn off or turn off during the specified time range.

    By default, AP indicators are allowed to turn on.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116159

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next