No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Usage Scenario

Usage Scenario

This section describes PoE usage scenarios.

APs are usually installed in the corridors or on the ceilings where power sockets are unavailable. In many WLAN applications, the administrator manages many APs that require unified power supply and management. In this case, power supply management is difficult.

As shown in Figure 5-21, the PoE function deployed directly provides power for each AP, without the need for additional external power supplies. This reduces cable connections, saves network construction costs, and facilitates AP management.

Figure 5-21  PoE application

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118982

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next